Same Day Quotes
30 Day Returns
Free Shipping On $500
5-Year Warranty
Certified Products
Same Day Quotes
30 Day Returns
Free Shipping On $500
5-Year Warranty
Certified Products
Description
Specifications
FAQ
Yes. Each fixture has three wattage settings (shown in the product name) and two color temperatures, 4000K and 5000K. Turn off the power, open the small cover on the fixture to reach the two slide switches, and set wattage (1, 2 or 3) and color temperature (4000K or 5000K). It's easiest to set them on the ground before you hang the light. Because one fixture covers several light levels, you can order a single model for a whole project and set each light on site.
It depends on the model. Standard models run on 120-277V, which covers 120V, 208V, 240V and 277V. The HV model (SKU ending in "-HV") is for high-voltage service and runs on 277-480V, so it can go on an existing 480V high bay circuit without a step-down transformer. Don't connect a standard model to 480V, and don't use the HV model on 120V, 208V or 240V.
Higher ceilings and larger open areas need more light. Use the highest setting for the tallest ceilings and the lower settings for lower ceilings, smaller rooms or areas that need less light. Across the line, the 320W model is for the highest ceilings, such as warehouses, distribution centers and gyms; the 240W and 200W models suit mid-height ceilings; and the 150W models fit lower ceilings such as workshops, retail stockrooms and gas station canopies.
5000K is a crisp, daylight-white light, popular for warehouses, manufacturing, gyms and other areas where visibility and alertness matter most. 4000K is a slightly warmer neutral white that many prefer for retail, showrooms and spaces where people spend long hours. You can switch between them at any time with the color temperature switch.
Yes. It has a 0-10V dimming driver and a dimming cord, so it works with 0-10V dimmers, lighting control systems and networked lighting controls (NLC). It isn't designed for standard phase-cut (household) dimmers. Dimming works in addition to the wattage switch, so you can fine-tune the light level after install.
It comes with a hook for hanging from a chain, cable or ceiling hook, and a safety hanging kit is included. To mount it directly to a ceiling, wall or beam, add the Mounting Bracket. It's a U-shaped bracket that bolts to the sides of the light, so you can also tilt the fixture to aim it at racks, a wall or a work area.
Both plug into the fixture's sensor port, with no extra wiring, and turn the light on when someone enters and off when the area is empty.
Microwave: very sensitive and covers a wide area, picking up even small movements. Best for large open spaces such as open warehouse floors, gyms and loading areas. It can pick up motion through thin partitions, so it may respond to movement in a neighboring aisle.
PIR: detects body heat moving in its line of sight, so it won't trigger through racks, walls or doors. Best for aisles, storage zones and areas where each light should respond only to its own space.
It's IP65 rated and listed for wet locations, so it can be used under gas station canopies, at loading docks and in other covered outdoor areas. It works down to −40°F, so it's suitable for cold storage and unheated buildings. The upper limit is 113°F, so where air near the roof gets hotter than that in summer, mount it lower or make sure the space is ventilated.
American Lighting Systems offers a 5-year warranty on all LED fixtures, ensuring coverage for defects in materials or workmanship during the warranty period .
Yes, free shipping is available for orders of $500 or more within the continental USA (excluding products over 4ft in length) .
You may also like
Recently viewed
