Commercial steel round straight anchor base light poles that bolt to a concrete foundation for parking lots, campuses, walkways and industrial sites. Choose from 12 poles in mounting heights from 8 to 30 ft, with 3", 4" and 5" round shafts in 11 gauge or heavier 7 gauge steel. Each pole is a single piece with a welded base plate, and new anchor bolts and a base cover are included.
What Anchor Base Means
An anchor base pole mounts to a concrete foundation instead of being buried in the ground. The welded base plate sets over anchor bolts cast into the concrete, then the pole is leveled and secured with nuts and washers. If your existing pole is bolted to a concrete base, you need an anchor base pole. If it is set directly into the ground, see steel direct burial poles.
Why Round Straight Steel Poles
Round straight poles keep the same diameter from base to top for a clean, simple look that works on commercial, industrial and campus sites. On replacement jobs, the main reason to choose round straight is to match the poles already installed. For a pole that narrows toward the top, see steel round tapered poles.
How to Choose the Right Pole
- Mounting height: 8 to 14 ft poles suit walkways, entrances and post top fixtures. 16 to 20 ft poles cover smaller parking lots and drives. 25 and 30 ft poles light larger lots and industrial yards. For replacements, match the existing pole height to keep light levels and spacing the same.
- Shaft size and gauge: 3" shafts suit shorter decorative and pedestrian poles, 4" shafts suit mid-height poles, and 5" shafts suit 25 and 30 ft poles. Choose 7 gauge for extra strength with multiple fixtures or higher wind loads.
- Bolt circle: On replacement jobs, match the existing foundation's bolt circle and anchor bolt size. Bolt circle is measured center to center across opposite anchor bolts. Bolt circle details are listed on each product page.
- EPA and wind load: Add the EPA of every fixture and bracket on the pole and confirm the pole is rated for that total in your wind zone.
- Pole top: Confirm how your fixture mounts. Use a round tenon adapter for 2-3/8" slip fitter fixtures, or add a bullhorn or spoke bracket for two to four fixtures.
- Environment: Coastal and high-humidity sites need extra attention to finish and corrosion protection. For salt-exposed sites, consider fiberglass or aluminum poles.
Where Round Straight Poles Are Used
- Parking lots for retail centers, restaurants and shopping plazas
- Warehouses, distribution centers and industrial yards
- Campuses, walkways and pedestrian areas
- Perimeter and general site lighting
- Pole replacements on existing concrete foundations
Other Pole Options
Browse all steel anchor base poles, including square straight and square tapered styles, or shop all light poles. Top them with our LED parking lot lights or LED post top lights.
Replacing a pole and not sure what fits? Send photos and measurements of the existing base and anchor bolts, and our team will help confirm the right pole. Contact us or call 321-203-4869.